About 60 full cuts with careful operation.
The RailSaw Max is compatible with most standard excavators that have a quick attach system and sufficient hydraulic capacity. it can be attached to a boom truck or a BTMF truck
Under typical conditions, the RailSaw Max can complete a clean rail cut in approximately 3 minutes. If you are doing cut and break operations the cut will take about 30 seconds
The saw operates at low RPM and produces little to no sparks, making it suitable for environments with fire risk.
Yes, the RailSaw Max is built for rugged use and can operate in rain, snow, and mud without performance issues.
The saw is like any other grapple and requires greasing occasionally. The saw needs a minimum 10 GPM.
It will cut ties and suitable size pipe. two rails at once if you grab them right
Yes, it can cut rail in track without the need to shovel out the ballast.
No, it won't be able to do a cut in hot rail in track. It will pinch just like a regular saw.